2022 Lincoln Electric Engine Driven Welders Gas K2923-1

Information

2022 Lincoln Electric Engine Driven Welders Gas K2923-1

Ranger® 250 GXT Engine Driven Welder (Kohler®) (w/Electric Fuel Pump)

Ranger 250 GXT engine drives have extra welding performance for AC or DC stick and DC wire welding.

DETAILS

XTra Performance! XTra Power! XTra Protection!

Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 7,200 watts continuous for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.

Features may include:

Totally Enclosed Case
  • Engine is fully protected.
  • 3 service access doors.
  • Low Noise - 76.4 dBA sound level at 7m 100.7 dB sound power (Lwa) at rated output.
Versatile AC/DC Welding
  • AC/DC welding output for a broad range of stick electrode types.
  • 7,200 watts continuous power for generator, plasma cutter or inverter welder.
  • Lights, grinder, power tools.
  • Remote ready! 6-pin connector and local/remote switch for remote control operation.
23 HP Kohler® Gasoline Engine
  • 2 cylinder, 4 cycle overhead valve air-cooled design.
  • Electric fuel pump avoids vapor lock.
  • Oil drain extension for easy oil changes.
  • 45 litre tank for extended run times.
  • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
Rugged Reliability
  • Welding and AC Generator Outputs Rated at 40°C.
Features
  • Totally Enclosed Case
  • Versatile AC/DC Welding
  • 7,200 Watts Continuous Single-Phase AC Generator Power. (2 x 240V 15A IP66 Receptacles)
  • 23 HP Kohler Petrol Engine
  • Rugged Reliability

Photos

Highlights

  • Kerrville, Texas
  • 2022
  • Lincoln Electric
  • Engine Driven Welders Gas K2923-1
  • Model: OHV Command CH730
  • Output: 7200 watts continuous
  • Available
  • 21.5 in (546 mm)
  • 30 in (762 mm) to roof / 36.2 in (920 mm) to top of exhaust

Specifications

  • 2022
  • Lincoln Electric
  • Engine Driven Welders Gas
  • K2923-1
  • Power Generation/Welder
  • Model: OHV Command CH730
  • Kohler
  • 23 HP@3600 RPM
  • High Idle Operating Speed @ Rated Output: 3600
  • Max Rating: 250 | Single Phase Auxiliary Output: 60 Hz single phase Two receptacles each 15A @ 240V | Auxiliary Output Frequency: 60 Hz | Max OCV: 80V | Output Range: 50-250A AC/DC | Rated Output: 250A AC/25V/100% , 250A DC/25V/100%
  • Output: 7200 watts continuous
  • D: 42.3 in (1073 mm)
  • 30 in (762 mm) to roof / 36.2 in (920 mm) to top of exhaust
  • 21.5 in (546 mm)
  • Tank: 12 US gal. (45.4 L)
  • 2.0 qts. (1.9 L)
  • Net: 534 lbs (242 kg)
  • Machines Processes: Stick (SMAW) / Flux-Cored (FCAW) / TIG (GTAW) / MIG (GMAW) / Flux-Cored Self-Shielded (FCAW-S) / Flux-Cored Gas-Shielded (FCAW-G) | Machines Communication Technology: analog | Amphenol Pins (type of connector): 6 | Work Lead Connector Type: Lug | Mode Icon: CC/CV | Polarity: AC/DC | Typical Application: Construction / Construction & Field Erection / General Fabrication / Maintenance & Repair / Repair Welding / Structural Fabrication / Structural Welding