2022 Lincoln Electric Engine Driven Welders Gas K2382-4
- Year 2022
- Make Lincoln Electric
- Model Engine Driven Welders Gas
- Engine Model: OHV Command CH730
2022 Lincoln Electric Engine Driven Welders Gas K2382-4
2022 Lincoln Electric Engine Driven Welders Gas K2382-4
Ranger® 250 GXT Engine Driven Welder (Kohler®) (w/Electric Fuel Pump)Classic welder/generator with great welding performance for AC or DC stick and DC wire welding.
DETAILSEXTRA POWER, EXTRA PERFORMANCE
Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
Features may include:
Totally Enclosed Case- Engine is fully protected.
- 3 service access doors.
- Low Noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
- Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
- AC/DC welding output for a broad range of stick electrode types.
- Remote ready! 6-pin connector and local/remote switch for remote control operation.
- 10,000 watts continuous power for generator output, plasma cutter or inverter welder.
- Power-up lights, grinder, and power tools.
- 2 cylinder, 4 cycle overhead valve air-cooled design.
- Electric fuel pump avoids vapor lock.
- Oil drain extension for easy oil changes.
- 12 gallon tank for extended run times.
- Welding and AC Generator Outputs Rated at 104°F (40°C).
Engine
Engine Manufacturer
Kohler
Engine
Model: OHV Command CH730
Cylinder Liners
2 Cylinder
Cooling
Air-Cooled
Engine Power
23 HP
Rated Engine Speed
High Idle Operating Speed @ Rated Output: 3600
Fuel System
Fuel Type
Gasoline
Electric
Electrical
Max Rating: 250A / 25V /100% @ 104°F (40°C) | Output Range by Mode: CC-Stick: 50 – 250 Amps, CV-Wire: 14 – 28 Volts | Single Phase Auxiliary Output: 10,000 Watts Continuous, 120/240V | Auxiliary Output Frequency: 60 Hz
Dimensions
Height
30 in (762 mm)
Width
21.5 in (546 mm)
Dimensions
D: 42.3 in (1073 mm)
Capacities
Fuel Capacity
Tank: 12 US gal. (45.4 L)
Oil capacity
2.0 qts. (1.9 L)
Weights
Weight
Net: 510 lbs (231 kg)
Features
Features
Machines Processes: Stick (SMAW) / TIG (GTAW) / MIG (GMAW) / Flux-Cored Self-Shielded (FCAW-S) / Flux-Cored Gas-Shielded (FCAW-G) | Receptacle Types: NEMA 5-20R / NEMA 14-50R | Typical Application: Construction / Construction & Field Erection / General Fabrication / Maintenance & Repair / Piping / Process Piping / Repair Welding / Structural Fabrication / Structural Welding
Warranty
Warranty
3 Years Parts and Labor - Engine warranted separately by engine manufacturer